Here at Vicious Cycle Works we believe in good security when it comes to online purchases.  That's why we use VeriSign as our Gateway and MerchantE Solutions as our credit processor, so your information always stays in friendly hands!

To Shop the Online Catalog Click Here 

Chopper handlebars, motorcycle handlebars, custom handlebars and handlebars for Harley Davidsons ,Customs and Now Yamaha Roadstars. Our motorcycle & chopper handlebars are crafted from a 304 high polish stainless steel, they are then five stage mirror polished to a gleaming show quality finish. Handlebars for choppers and motorcycles. VCW MOTORCYCLE AND CHOPPER HANDLEBARS ARE IN BIG DEMAND BUT MADE IN LOW QUANTITIES SO GET YOUR ORDER IN NOW.

Vicious Cycle Works motorcycle handlebars, Gladiators, Sabres, Vampires, and Raptors  for stretched and stock choppers and motorcycles  available at our Online Store!

We take dreams, turn them into art, and create the reality.

NEW !  Adapters for springer front ends to fit standard configuration handlebars.  Our Chopper and Motorcycle  handlebars will now fit springer  front ends!
Adapters sold at www.paughco.com

They are listed under front ends-> page thirty two -> part number 161A -> mounting kit 161AK.         

Vampire/ View 360° Rotating Image

Gladiator/View 360° Rotating Image

Raptor/View 360° Rotating Image


VeriSign has routed, processed, and secured your payment information.
More information about VeriSign!

 

To order online click here.
To order by phone, call (724) 662 - 0581.

 

Gladiator and Sabre Motorcycle & Chopper  Handlebars

 Handlebar Measurement Guidelines for Motorcycle  &Chopper Handlebars: Understanding Rise and Pullback

PURCHASE THE MOTORCYCLE SLUM BARS
   
AVAILABLE FOR HARLEY DAVIDSONS, CUSTOMS AND NOW FOR YAMAHA ROADSTARS. YAMAHA BARS HAVE A 1 INCH HAND CONTROL AREA SO THAT ALL AFTERMARKET SWITCH HOUSINGS AND GRIPS ARE NOW AVAILABLE FOR THE YAMAHA ROADSTARS. The Slum Bars are made from a 304 Grade High Polish Stainless Steel ! The Slum Bars are now equipped with longer points and tighter curves.  After manufacturing these Motorcycle & Chopper  Handlebars they are Mirror Polished in a 5 step procedure.  The welds are blended to perfection..  These bars will fit any motorcycle & chopper with a three and a half inch center to center mounting bolt pattern.  These bars will look great on raked and stretched customs.
Measurements for the Motorcycle & Chopper  Slum Bars
Risers: Fat 1.5 Inches
Pullbacks: 1.25 Inches
Control Ends: 1 Inch
Rise: 8 Inches
Pullback: 13 Inches
Width: 32 Inches
PURCHASE THE  MOTORCYCLE GLADIATOR HANDLEBARS
   
 The GLADIATOR HANDLEBARS are made from  a 304 Grade High Polish Stainless Steel ! After manufacturing the se Motorcycle & Chopper Handlebars they are Mirror Polished in a 5 step procedure.  They have a double bend in the pullback.  The welds are blended to perfection..  These bars will fit any motorcycle & chopper with a three and a half inch center to center mounting bolt pattern.  These bars will look great on raked and stretched motorcycle & choppers and can be used on Harley Davidson's.
Measurements for the Gladiator Motorcycle & Chopper Handlebars
Risers: Fat 1.5 Inches
Pullbacks: 1.25 Inches
Control Ends: 1 Inch
Rise: 10.5 Inches
Pullback: 13.5 Inches
Width: 39 Inches
PURCHASE THE MOTORCYCLE SABRE HANDLEBARS
   
The SABRE handlebars are a more aggressive but shorter version of the raptor bars.  The pullback measurement can be ordered in the style shown or six inches shorter.  The bars are made from a 304 Grade High Polish Stainless Steel, after manufacturing they are Mirror Polished in a 5 Stage process  to Create a Show Bike Finish ! These bars will look best on a motorcycle & chopper up to forty eight degrees.  From forty eight degrees up please be aware they are going to come within two inches of the gas tank fully turned.  Using these bars on bikes with forty two and up degrees of rake should be left to custom bike builders.  Call for any questions on fitment above forty eight degrees. Call if you have any questions on Fitment..
(724) 662 - 0581
This is a view of the sabre handlebars which will give you an idea to how close they come to the gas tank at full turn.

 
Click the picture for a larger, more detailed view.

Measurements for the Motorcycle & Chopper Sabre Handlebars
Risers: Fat 1.5 Inches
Pullbacks: 1.25 Inches
Control Ends: 1 Inch
Rise: 7.25 Inches
Pullback: 17 Inches (Option: 11 Inches)
Width: 37 Inches (Option: Approx. 28 Inches)
PURCHASE THE  MOTORCYCLE VAMPIRE HANDLEBARS
   
The VAMPIRE Handlebars are made from a 304 Grade of  High Polish Stainless Steel, after manufacturing they are Mirror Polished  in a 5  Stage  process to a  Show Bike Finish !  The Vampire bars are Tig welded, fixture cooled, Show Polished. These bars look ideal on 36-50 + degree raked motorcycle or chopper that is stretched up to five inches or more. These will fit any motorcycle or chopper with a center-to-center 3.5 inch riser pattern.  The Vampire bars have a more aggressive look and are smaller then the Raptor bars but they still provide a comfortable ride!
Measurements for the  Motorcycle & Chopper  Vampire Handlebars
Risers: Fat 1.5 Inches
Pullbacks: 1.25 Inches
Control Ends: 1 Inch
Rise: 16 Inches
Pullback: 12 Inches
Width: 35 Inches
PURCHASE THE  MOTORCYCLE RAPTOR HANDLEBARS
  The RAPTOR  handlebars are made from a 304 Grade High Polish  Stainless Steel, after manufacturing they are Mirror Polished in a 5 stage Process to a Show Bike Finish.  The Raptor* bars are Tig welded, fixture cooled, and Mirror Polished ..  These bars look ideal on 36-48 degree raked motorcycle & chopper  that is stretched up to five inches.  Coming Soon: Same design bar but with lower rise, shorter pullback, and higher hand placement more suitable for stock motorcycle, chopper & Harley Davidson and wild customs.  Riser bolt pattern is the standard center-to-center 3.5 inch.  The Raptor bars have a more laid back feel and provide a higher comfort level.
Measurements for the Motorcycle & Chopper Raptor* Handlebars
Risers: Fat 1.5 Inches
Pullbacks: 1.25 Inches
Control Ends: 1 inch
Rise: 8 Inches
Pullback: 17 Inches
Width: 35 Inches
*Note: SABRE & RAPTOR : Measure down from center of riser bolt holes 24 in. down backbone, from there measure straight out to side 4 in.  You need this much clearance for controls when bike is turned all the way in Parked Position !

 

©Vicious Cycle Works LLC. 2003-2006
All rights reserved.
All other items or companies mentioned are the property of their respective owners and are for reference only.